Front Seat Frame Assembly Repair Procedures

Replacement

Wear gloves to avoid cutting your hands.

When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components. When removing interior trim components, use a plastic panel removal tool to avoid damaging the surface. Be careful not to bend or scratch the trim and panels.

1. 1
   Remove the front seat rear cover. (Refer to Front Seat - Front Seat Rear Cover).
2. 2
   Remove the front seat cushion cover. (Refer to Front Seat - Front Seat Cushion Cover)
3. 3
   Remove the mounting bolt (A).

   

4. 4
   Disconnect the connector (A).
5. 5
   Loosen the mounting bolts, then remove the front seat cushion extension modules (B).

   

6. 6
   Loosen the mounting screws, then remove the cushion extension lower cover (A).

   

7. 7
   Loosen the mounting bolts and separate the rear frame assembly (A) of the front seat from the front seat cushion frame assembly (B).

   

8. 8
   Install in the reverse order of removal.

   For a seat equipped with a side airbag, remove the side airbag from the seat frame assembly. (Refer to Passive Safety System - "Side Airbag Module (SAB)"). Before performing service, thoroughly review the precautions and service procedures related to the airbag. (Refer to Passive Safety System - "Side Airbag Module (SAB)").