Hyundai Genesis DH Quiz
Body (Interior and Exterior)

Front Seat Outer Cover Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
5steps
~30min
2/5difficulty
Done 0 of 5

Replacement
  • Wear gloves to avoid cutting your hands.
  • When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components.
  • When removing interior trim components, use a plastic panel removal tool to avoid damaging the surface.
  • Be careful not to bend or scratch the trim and panels.
  1. Remove the front seat center shield cover (A).
  2. Loosen the mounting screws, then remove the front seat shield front outer cover (A).
  3. Disconnect the power seat air cushion switch connector (A).
  4. Loosen the mounting screws, then separate the front shield outer cover (A) from the rear shield outer cover (B).
  5. Install in the reverse order of removal.
    • Make sure the connector is properly connected.
    • Replace all damaged clips.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.