Front Seat Head Restraint

The driver and front passenger seats are equipped with adjustable head restraints for occupant safety and comfort.

Forward and Backward Adjustment

The head restraint can be adjusted forward to 3 different positions by pulling the head restraint forward to the desired latch position. To adjust the head restraint to the rearmost position, pull it fully forward until it stops, then release it.

Up and Down Height Adjustment

To raise the head restraint:

1. Pull up to the desired position (1).

To lower the head restraint:

1. Press and hold the release button (2) on the head restraint support.

2. Lower the head restraint to the desired position (3).

CAUTION

If the seatback is folded forward with the head restraint installed and the seat cushion is raised, the head restraint may contact the sun visor or other vehicle parts.

Removal/Installation

To remove the head restraint:

1. Recline the seatback (2) using the seatback recline switch (1).

2. Raise the head restraint as far as possible.

3. Press the head restraint release button (3) while pulling the head restraint up (4).

WARNING

NEVER allow anyone to ride in a seat with the head restraint removed.

To reinstall the head restraint:

1. Recline the seatback.

2. Insert the head restraint posts (2) into the holes while pressing the release button (1).

3. Adjust the head restraint to the desired height.

4. Recline the seatback (4) using the seatback recline switch (3).

WARNING

Always make sure the head restraint is locked in place after reinstallation and properly adjusted.