Front Upper Arm Repair Procedures

Removal

1. 1
   Remove the front wheel and tire (A) from the front hub.

   Tightening torque: 88.3 ~ 108 N·m

   Be careful not to damage the hub bolts when removing the rear wheel and tire (A).

   

2. 2
   Remove the front strut assembly. (Refer to Front Suspension System - "Front Strut Assembly")
3. 3
   Disconnect the front upper arm (A) from the front strut bracket (B) by loosening the bolt.

   Tightening torque: 98.1 ~ 118 N·m

   

4. 4
   Installation is the reverse of removal.

   Take note of the installation angle of the upper arm.

5. 5
   Check alignment. (Refer to Tires/Wheels – Wheel Alignment)

Inspection

1. 1
   Inspect the bushing for wear and damage.
2. 2
   Check the ball joint rotating torque.