Front Stabilizer Bar Repair Procedures

Removal

1. 1
   Loosen the wheel nuts slightly. Raise the vehicle and make sure it is securely supported.
2. 2
   Remove the front wheel and tire (A) from the front hub.

   Tightening torque: 88.3 ~ 108 N·m

   

   Be careful not to damage the hub bolts when removing the front wheel and tire.

3. 3
   Loosen the nut (A) and disconnect the stabilizer link from the front strut assembly.

   Tightening torque: 98.1 ~ 118 N·m

   [EXC]

   

   [HPD]

   

4. 4
   Remove the lower covers (A) and (B).

   

5. 5
   Loosen the clamp bolts and separate the stabilizer bar from the subframe.

   Tightening torque: 49.0 ~ 64 N·m

   [4WD]

   

   [2WD]

   

6. 6
   Install in the reverse order of removal.
7. 7
   Check alignment. (Refer to Tires/Wheels – Wheel Alignment)

Inspection

1. 1
   Inspect the bushing for wear and damage.
2. 2
   Check the ball joint rotating torque.