Hyundai Genesis DH Quiz
Engine Mechanical System

Rear Oil Seal Repair Procedures

In this manual: Engine Mechanical System
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
4steps
~34min
3/5difficulty
2special tools
Done 0 of 4

Removal

  1. Remove the drive plate and adapter plate. (Refer to Cylinder Block - "Drive Plate")
  2. Remove the rear oil seal (A).

Installation

  1. Using SST (09231-3C200, 09231-H1100), install the rear oil seal.
    Always use a new oil seal.
  2. Install the drive plate and adapter plate. (Refer to Cylinder Block - "Drive Plate")

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.