Engine Mechanical System
Water Jacket Spacer Repair Procedures
In this manual: Engine Mechanical System
4steps
~24min
2/5difficulty
Done 0 of 4
Removal
- Remove the left/right cylinder head assembly. (Refer to Cylinder Head Assembly - "Cylinder Head")
- Remove water jacket spacer 1# (A) and 2# (B).

Installation
- Install water jacket spacer 1# (A) and 2# (B).

Insert the spacer aligning it with the protrusion on the inside of the block; it must be located under the cylinder head mating surface.


- Install the left/right cylinder head. (Refer to Cylinder Head Assembly - "Cylinder Head")
Test yourself
A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?