Washer

In the OFF (O) position, gently pull the lever toward you to spray washer fluid onto the windshield and operate the wipers for 1-3 cycles.

Use this function when the windshield is dirty.

The spraying and washing operation continues until the lever is released. If the washer does not work, check the fluid level. If the fluid level is insufficient, add an appropriate non-abrasive washer fluid to the washer fluid reservoir.

The washer fluid reservoir filler neck is located at the front of the engine compartment, on the driver's side.

NOTICE To avoid possible damage to the washer pump, do not use it when the washer fluid reservoir is empty. WARNING Do not use the washer at sub-zero temperatures without first warming the windshield with the defroster. The solution may freeze on contact with the windshield and obstruct visibility. NOTICE - To avoid possible damage to the wipers and washer, do not operate the wipers when the windshield is dry. - To avoid damage to the wiper blades, do not use gasoline, kerosene, thinner or other solvents on them. - To avoid damage to the wiper arms and other components, do not try to move the wipers manually.