Hyundai i20 Quiz
Heating, Ventilation and Air Conditioning

Receiver-Drier Repair Procedures

In this manual: Heating, Ventilation and Air Conditioning
General Information — 17Engine Mechanical System — 79Engine Electrical System — 50Emission Control System — 22Engine/Fuel Control System — 107Clutch System — 27MANUAL TRANSMISSION SYSTEM — 21Drive Shaft and Axle — 18Suspension System — 29Steering System — 21Restraint — 41Braking System — 53Body Work (Interior and Exterior) — 190Body Electrical System — 181Heating, Ventilation and Air Conditioning — 58
6steps
~36min
2/5difficulty
0102030405014.711N·mlb·ft
Tightening torque found on this page
Done 0 of 6

REPLACEMENT

  1. Remove the condenser.
  2. Remove the plug (B) from the bottom of the condenser using hex key L [Hex 14] (B).

    Tightening torque: 9.8 ~ 14.7 N·m

  3. Remove the receiver-drier (A) from the condenser using a long screwdriver. Inspect the receiver-drier for agglomerate clogging at the bottom of the filter.
  4. Apply compressor oil to the gaskets, O-rings and threads of the new lower cover.
  5. Install a new receiver-drier into the receiver-drier. The receiver-drier must be vacuumed before it is exposed to air during use.
  6. Install the new lower cap on the condenser.

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.