Body Electrical System

Hazard Warning Switch Repair Procedures

8steps
~48min
2/5difficulty
Done 0 of 8

DEPOSIT

  1. Disconnect the negative (-) battery terminal.
  2. Remove the center fascia panel. (Refer to Body - "Center Instrument Panel")
  3. Disconnect the hazard warning switch after releasing the center console panel clip.

REMEDY

  1. Connect the hazard warning connector and install the panel to the center edge.
  2. Connect the negative (-) battery terminal.

Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Disconnect the connector.
  3. Check each switch position to make sure there is no open circuit between the terminals according to the table below.

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.