Body Electrical System

Dome Lamp Console Repair Procedures

6steps
~36min
2/5difficulty
Done 0 of 6

DEPOSIT

  1. Disconnect the negative (-) battery terminal.
  2. Remove the mounting screws (2 pcs). Then remove the dome lamp console (A).
  3. Remove the overhead console after disconnecting the connector (A).
  4. If it is necessary to replace the bulb (B), replace the bulb after removing the lens (A).

REMEDY

  1. Install the bulb in the dome lamp console assembly after connecting the connector.
  2. Install the lens, tightening the 2 screws.

Inspection

  1. Remove the dome lamp console assembly and check the continuity between the terminals. If the continuity does not meet the specifications, replace the light switch.
    [General]

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.