Hyundai i20 Quiz
Suspension System

TPMS Receiver Repair Procedures

In this manual: Suspension System
General Information — 17Engine Mechanical System — 79Engine Electrical System — 50Emission Control System — 22Engine/Fuel Control System — 107Clutch System — 27MANUAL TRANSMISSION SYSTEM — 21Drive Shaft and Axle — 18Suspension System — 29Steering System — 21Restraint — 41Braking System — 53Body Work (Interior and Exterior) — 190Body Electrical System — 181Heating, Ventilation and Air Conditioning — 58
7steps
~42min
2/5difficulty
010203040505.94N·mlb·ft
Tightening torque found on this page
Done 0 of 7

REPLACEMENT

  1. Disconnect the negative (-) battery cable.
  2. Remove the glove box. (Refer to Body — Instrument Panel)
  3. Remove the TPMS receiver by loosening the nut.

    Tightening torque: 3.9~5.9 N·m

  4. Disconnect the TPMS connector.
  5. Secure the new part to the vehicle and connect the connector.
  6. Reconnect the battery and turn the ignition on.
  7. After Replacing the Receiver, Learn the GRS [Vehicle Name Input Initialization]
    [VIN Input Initialization]
    [Wheel Sensor ID Recording Initialization (Wireless Communication)]

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.