Adjusting the Outside Rearview Mirrors

1. Press the L (left) or R (right) button (1) to select the mirror you want to adjust.

2. Using the mirror adjustment switch (2), move the selected mirror up, down, left, or right.

3. After adjusting, set the button to the neutral (center) position to prevent unintentional adjustment.

NOTICE

• The mirrors stop moving when they reach the maximum adjustment angle, but the motor continues to run as long as the switch is pressed. Do not hold the switch longer than necessary, or the motor may be damaged.
• Do not try to adjust the outside rearview mirror manually, as the motor may be damaged.

Folding the Outside Rearview Mirror

Manual Type

To fold the outside rearview mirror, grasp the mirror housing and fold it toward the rear of the vehicle.

Electric Type

Left: The mirror will unfold.

Right: The mirror will fold.

Center (AUTO): The mirror folds or unfolds automatically as follows:

• Without Smart Key System
  - The mirror will fold or unfold when the door is locked or unlocked with the remote key and the Welcome Mirror function is activated in the User Settings mode on the LCD display.
• With Smart Key System
  - The mirror will fold or unfold when the door is locked or unlocked with the smart key and the Welcome Mirror function is activated in the User Settings mode on the LCD display.
  - The mirror will fold or unfold when the door is locked or unlocked with the button on the outside door handle and the Welcome Mirror function is activated in the User Settings mode on the LCD display.

NOTICE

The power outside rearview mirrors operate even when the ignition switch is in the OFF position. However, to prevent unnecessary battery discharge, do not adjust the mirrors longer than necessary with the engine off.

NOTICE

Do not fold the power outside rearview mirror manually. This may cause the motor to malfunction.