Hyundai Kona Quiz
Body Electrical System

Blind-Spot Collision Warning Switch Repair Procedures

In this manual: Body Electrical System
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
4steps
~24min
2/5difficulty
Done 0 of 4

Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver airbag assembly trim cover (LH). (Refer to Body - Driver Airbag Assembly)
  3. Disconnect the rheostat switch connector (A).
  4. Turn on the BCW switch, then check the continuity between the terminals of the BCW switch connector.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.