Hyundai Kona Quiz
Body (Interior and Exterior)

Rear Door Outside Handle Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
4steps
~24min
2/5difficulty
0102030405010.88N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Replacement

  1. Remove the plug hole.
  2. Loosen the mounting bolt and remove the rear door outside handle cover (A).

    Tightening torque: 7.8–10.8 N·m

  3. Remove the rear door outside handle (A) by pressing it in the direction of the arrow.
  4. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.