Hyundai Kona Quiz
Body (Interior and Exterior)

Rear Door Body Side Weatherstrip Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
5steps
~30min
2/5difficulty
0102030405032.424N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Replacement

[Rear Door Side Weatherstrip]

  1. Loosen the adjusting shim bolt (B) of the rear door.

    Tightening Torque: 21.6–32 N·m

  2. Disengage the clips, then remove the rear door side seal (A).
  3. To install, reverse the removal procedure.

[Rear Door Side Body Weatherstrip]

  1. Disconnect the clips, then remove the rear door body side weatherstrip (A).
  2. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.