Body Electrical System
Room Lamp Repair Procedures
In this manual: Body Electrical System
11steps
~66min
3/5difficulty
Done 0 of 11
Removal
[Room Lamp]- Disconnect the negative (-) battery terminal.
- Using a screwdriver or trim remover, separate the room lamp lens (A) from the room lamp.

- If it is necessary to replace the bulb, remove the bulb after separating the room lamp lens.
- Remove the room lamp after loosening the mounting screws.

- Remove the room lamp assembly after disconnecting the room lamp connector.

- Separate the cosmetic lamp (A) from the headliner after disconnecting the mounting clip (B).

Installation
[Room Lamp]- Install the room lamp after connecting the connector.
- Install the room lamp lens.
- Connect the negative (-) battery terminal.
- Install the vanity lamp.
- Connect the negative (-) battery terminal.
Test yourself
A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?