Luggage Side Trim

Components and Component Location

Component Location

Repair Procedures

Replacement

When removing with a flat-blade screwdriver or puller, wrap the tool with protective tape to prevent damage to the components. Wear gloves to avoid cutting your hands.

Be careful not to bend or scratch the trim and panels.

1. 1
   Remove the third row seat assembly. (Refer to Rear Seat - "Rear Seat Assembly")
2. 2
   Remove the rear door body side weatherstrip. (Refer to Rear Door - "Rear Door Body Side Weatherstrip")
3. 3
   Remove the rear door weatherstrip. (Refer to Rear Door - "Rear Door Weatherstrip")
4. 4
   Remove the rear door sill trim. (Refer to Interior Trim - "Door Scuff Trim")
5. 5
   Remove the rear pillar garnish. (Refer to Interior Trim - "Rear Pillar Trim")
6. 6
   Remove the rear door pillar trim. (Refer to Interior Trim - "Rear Pillar Trim")
7. 7
   Remove the rear cross trim. (Refer to Interior Trim - "Rear Cross Trim")
8. 8
   Slide the second row seat forward as far as possible.
9. 9
   Loosen the mounting screws and remove the side trim panel of the luggage compartment (A).

   

10. 10
    Press the lock pin and disconnect the various connectors (A).

    

    

11. 11
    To install, reverse the removal procedure.

    Replace any damaged clips (or pin-type retainers). Make sure the connector is properly connected.