Rear Pillar Trim

Components and Component Location

Component Location

Repair Procedures

Replacement

When removing with a flat-blade screwdriver or puller, wrap the tool with protective tape to prevent damage to the components. Wear gloves to avoid cutting your hands.

Be careful not to bend or scratch the trim and panels.

1. 1
   Remove the rear door body side weatherstrip.
2. 2
   Open the lower cover of the 2nd row seat belt (A) and loosen the mounting bolts.

   

3. 3
   Loosen the mounting bolt and remove the rear pillar trim (A).

   

4. 4
   To install, reverse the removal procedure.

   Replace any damaged clips (or pin-type retainers).

When removing with a flat-blade screwdriver or puller, wrap the tool with protective tape to prevent damage to the components. Wear gloves to avoid cutting your hands.

Be careful not to bend or scratch the trim and panels.

1. 1
   Remove the third row seat assembly. (Refer to Rear Seat - "Rear Seat Assembly")
2. 2
   Remove the rear door seal.
3. 3
   Loosen the mounting bolt of the 3rd row seat belt (A).

   

4. 4
   Remove the rear door pillar trim (A).

   

5. 5
   To install, reverse the removal procedure.

   Replace any damaged clips (or pin-type retainers).