Check the alignment of the front glass weatherstrip (B) and roof panel (A), and adjust if necessary. Alignment Adjustment Standard value [mm (in)] (1) Front edge: 0 mm (0 in) (2) Rear edge: 0 mm (0 in)
Slide the mechanism cover (A) in the direction of the arrow to align it with the groove (B), and remove it.
Adjust the height by loosening the height adjustment screw (A) of the glass.
Unscrew the installed screw while tilting the movable glass.
Use the emergency mode of the sunroof only when the sunroof needs to be opened or closed in case of engine failure.
Use a hex key to open or close the sunroof after removing the roof trim. Do not apply excessive force when opening or closing the sunroof. [Moving Glass Motor][Shade Motor]
If necessary, reset the sunroof according to the reset procedure. (Refer to Body Electrical System - "Sunroof Motor")
Emergency Operation
?
Test yourself
A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.
