Body (Interior and Exterior)

Sunroof Assembly

8steps
~48min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 8

Repair Procedures

Replacement

[Front]

  1. Remove the headliner assembly. (Refer to Headliner - "Headliner Assembly")
  2. Remove the front sunroof glass. (Refer to Sunroof - "Sunroof Glass")
  3. Press the stopper pin and remove the drain hose (A).
    Hyundai Palisade. Repair procedures
  4. Loosen the mounting nuts and remove the front sunroof assembly (A).

    Tightening torque: 7.8–11.8 N·m

    Hyundai Palisade. Repair procedures
  5. Install in the reverse order of removal.
    Hyundai Palisade. Repair procedures
    • After replacing the sliding glass, adjust the alignment if necessary.

[Rear]

  1. Remove the headliner assembly. (Refer to Headliner - "Headliner Assembly")
  2. Loosen the mounting nuts and remove the rear sunroof assembly (A).

    Tightening torque: 7.8–11.8 N·m

    Hyundai Palisade. Repair procedures
  3. Install in the reverse order of removal.

Test yourself

A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.