Wireless Charger

Components and Components Location

Components

Wiring Diagram

Wiring Diagram

Repair Procedures

Removal

Touching wireless charging system components with wet hands may result in electric shock.

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the floor console upper cover assembly. (Refer to Body - "Floor Console Assembly")
3. 3
   Disconnect the connector, then remove the wireless charging unit.

   

Installation

1. 1
   Connect the wireless charging unit connectors.
2. 2
   Install the wireless charging unit.
3. 3
   Install the floor console assembly.
4. 4
   Connect the negative (-) battery terminal.

[Diagnosis Using KDS / Diagnostic Tool]

1. 1
   In the body electrical system, malfunctions can be quickly diagnosed using the vehicle diagnostic system (Diagnostic tool). The diagnostic system (diagnostic tool) provides the following information.

   1. DTC Search: Check malfunction and diagnostic trouble code (DTC)
   2. Data Analysis: Check the input/output data status of the system
   3. Actuation Test: Check the system operating status
   4. S/W Management: Control other functions, including system parameter setting and zero point adjustment
2. 2
   To diagnose the vehicle using the diagnostic tool, select "DTC Analysis" and "Vehicle".

   

3. 3
   To check the current status, select "Data Analysis".

   

4. 4
   Select "WPC" to check the current input/output data status.

   

   

5. 5
   To forcibly activate the input value of the module under test, select the "Activation Test" option.