Engine Mechanical System

Air filter

10steps
~60min
3/5difficulty
010203040504.94N·mlb·ft
Tightening torque found on this page
Done 0 of 10

Components and Component Location

COMPONENTS

1. Air intake hose
2. Air filter element
3. Air cleaner housing
4. Air duct
5. Clamp

Repair Procedures

Removal and Installation

  1. Remove the engine cover. (Refer to Engine and Transaxle - "Engine Cover")
  2. Disconnect the negative battery cable and the positive battery cable.
  3. Remove the air duct (A).
  4. Disconnect the brake booster vacuum hose (B) and the heater hose (A).
  5. Disconnect the intake hose (C) and the air filter (D). Tightening torque Hose clamp: 2.9 ~ 4.9 N·m Air filter bolts: 7.8 ~ 9.8 N·m
  6. To install, perform the removal procedure in reverse order.
  7. Pull the collar to open the service cover (A).
  8. Turn the element locking lever in the "UNLOCK" direction to unlock it. Then pull out the element.
  9. Replace the air cleaner element (A) with a new one.
  10. Fully insert the element into the air cleaner. Turn the lever in the "LOCK" direction to securely lock it. Then close the service cover (A).
Air Filter Element Replacement

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.