Body Work (Interior and Exterior)
Front Door Trim Panel: (Refer to BD-32)
In this manual: Body Work (Interior and Exterior)
5steps
~30min
2/5difficulty
Done 0 of 5
Components and Component Location
COMPONENT LOCATION

| 1. Rear Door Trim |
Repair Procedures
REPLACEMENT
- Using a screwdriver or removal tool, remove the rear door delta inside trim (A).

- Loosen the mounting screw, then remove the rear door trim panel (A).

- Remove the rear door inside handle bezel (A).

- Disconnect the power window switch connector (A).

- To install, perform the removal procedure in reverse order.
Test yourself
A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?