Body Work (Interior and Exterior)

Rear Door Outside Handle

4steps
~24min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Components and Component Location

COMPONENT LOCATION

1. Rear door outside handle

Repair Procedures

REPLACEMENT

  1. Remove the plug hole cover (B).
  2. Loosen the set bolt, then remove the latch from the front door (A).

    Tightening torque: 7.8 – 11.8 N·m

  3. Remove the rear door outside handle (A) by pulling it in the direction of the arrow.
  4. To install, perform the removal procedure in reverse order.

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.