Engine Electrical System
INTERNAL CRUISE CONTROL
In this manual: Engine Electrical System
10steps
~60min
3/5difficulty
Done 0 of 10
Circuit Diagrams
Wiring Diagram

| 1. Left steering wheel switch (audio + hands-free) 2. Right steering wheel remote switch (cruise control + computer) on board |
Repair Procedures
Removal and Installation
- Disconnect the negative (-) battery terminal.
- Remove the airbag module from the steering wheel. (Refer to Restraints - "Driver Airbag Module and Switch (DAB)" rotating)
- Remove the steering wheel. (Refer to Steering System - "Steering Wheel")
- Remove the steering wheel front cover (A) after loosening the screws.

- Disconnect the remote control connector on the steering wheel (A).

- Remove the steering wheel remote control (A) after loosening the screw.

- To install, perform the removal procedure in reverse order.
Inspection
RESISTANCE MEASUREMENT- Disconnect the cruise control switch connector from the control switch.

- Measure the resistance between the control switch terminals when the operating switches are on (switch pressed).
INTERIOR FUNCTION Thick head Resistance CANCEL 3 - 4 330 Ω ± 5% SET/- 3 - 4 550 Ω ± 5% RES/+ 3 - 4 880 Ω ± 5% ON→OFF 3 - 4 1.44 kOhm ± 5% - If not within specification, replace the switch.
Test yourself
A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?