Body Electrical System

Power Seat Control Switch

6steps
~36min
2/5difficulty
Done 0 of 6

Circuit Diagrams

Wiring Diagram

Repair Procedures

Inspection

Seat Control Switch
  1. With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity does not meet the specification, replace the power seat.
    [Manual Seat Switch]
    [Power Seat Control Switch]

DEPOSIT

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front seat outer cover. (Refer to Body - "Front Seat Outer Cover")
  3. Remove the power seat control switch (A) after loosening the screws.

REMEDY

  1. Install the power seat switch after connecting the connector.
  2. Install the front seat outer cover.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.