Body Electrical System
POWER SEAT MOTOR
In this manual: Body Electrical System
14steps
~84min
3/5difficulty
Done 0 of 14
Components and Component Location
COMPONENT LOCATION

| 1. Lumbar Motor (Horizontal) 2. Rear Height Motor 3. Recline Motor 4. Slide Motor |
5. Front Height Motor 6. Limit Switch for Sleep Position 7. Lumbar Switch 8. Seat Switch |
Description and Operation
Description
The seat motor is operated by the motor as follows.- SLIDE MOTOR
- Front Height Motor
- REAR HEIGHT ADJUSTMENT MOTOR
- RECLINE MOTOR
Repair Procedures
Inspection
POWER SEAT MOTOR- Disconnect the connectors from each motor. [Slide Motor]
[Rear Height Motor]
[Front Height Motor]
[Recline Motor]
[Lumbar Support Motor]

- When battery power is applied to the motor connector, check that the motor operates smoothly.
- Then reverse the polarity and confirm the motor operates in the reverse direction.
- If the motor operates abnormally, replace it. [Passenger / Driver]

- Disconnect the limit switch and turn the switch to the end position.
- Check the continuity between the terminals.
- Make sure the seat operates normally when moving in reverse. after maximum operation.
- If there is a malfunction, replace the limit switch.


DEPOSIT
FRONT SEAT- Disconnect the negative (-) battery terminal.
- Remove the front seat assembly. (Refer to Body - "Front Seat")
Test yourself
A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?