Hyundai Tucson Quiz
Body Work (Interior and Exterior)

Instrument Cluster Fascia Panel

In this manual: Body Work (Interior and Exterior)
General Information — 17Engine Mechanical System — 51Engine Electrical System — 26Emission Control System — 23Engine/Fuel Control System — 44Clutch System — 12MANUAL TRANSMISSION SYSTEM — 12AUTOMATIC TRANSMISSION SYSTEM — 42Four-Wheel Drive (4WD) System — 14Drive Shaft and Axle — 22Suspension System — 30Steering System — 16Restraint — 21Braking System — 47Body Work (Interior and Exterior) — 145Body Electrical System — 162Heating, Ventilation and Air Conditioning — 39
13steps
~78min
3/5difficulty
Done 0 of 13

Components and Component Location

COMPONENT LOCATION

1. Instrument cluster front panel

Repair Procedures

REPLACEMENT

  1. Using a screwdriver or a remover, remove the front door guard garnish (A).
  2. Remove the hook of the trunk lock release handle (A) while holding it with a cylindrical remover.
  3. Using a screwdriver or removal tool, remove the roof side garnish (A).
  4. Using a screwdriver or remover, remove the instrument panel side cover [G] (A).
  5. Using a screwdriver or a remover, remove the center speaker grille (A).
  6. Using a screwdriver or a remover, remove the upper front panel of the instrument cluster (A).
  7. Loosen the mounting screws and remove the center ventilation cover (A) and center ventilation outlet.
  8. Loosen the mounting screws and remove the lower safety pad panel (A).
  9. Disconnect the connectors of the lower instrument panel switch (B).
  10. Loosen the mounting screw and remove the safety pad insert [G] (A).
  11. Disconnect the side switch connector from the instrument panel (B).
  12. Loosen the mounting screws and remove the instrument cluster fascia panel (B).
  13. To install, perform the removal procedure in reverse order.

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.