Main Instrument Panel

Components and Component Location

COMPONENT LOCATION

Repair Procedures

REPLACEMENT

1. 1
   Remove the floor console assembly. (Refer to Floor Console - Floor Console)
2. 2
   Remove the crash pad lower panel. (Refer to Instrument Panel - Lower Panel)
3. 3
   Remove the instrument cluster fascia panel. (Refer to Instrument Cluster Fascia - "Center Console Panel")
4. 4
   Remove the heater and A/C control assembly. (Refer to Heating, Ventilation, Air Conditioning - "Heater and A/C Control Assembly (Manual)") (Refer to Heating, Ventilation, Air Conditioning - "Heater and Air Conditioning Control Assembly (DATC)")
5. 5
   Remove the center fascia panel. (Refer to Instrument Panel - Center Fascia Panel)
6. 6
   Remove the steering wheel. (Refer to Steering System - "Steering Wheel")
7. 7
   Remove the lower panel from the steering column garnish. (Refer to Instrument Panel - "Steering Column Cover")
8. 8
   Remove the multifunction switch. (Refer to Body Electrical System - "Multifunction Switch".)
9. 9
   Remove the instrument cluster. (Refer to Body Electrical System - "Instrument Cluster".)
10. 10
    Remove the center speaker. (Refer to Body Electrical System - "Speaker")
11. 11
    Loosen the mounting screw and remove the side trim protector pad [G] (A).

    

12. 12
    Disconnect the airbag warning lamp connector (A).

    

13. 13
    Loosen the mounting bolts (A).

    

14. 14
    Loosen the mounting nuts and bolts and remove the main safety device cover (A).

    

15. 15
    Disconnect the passenger airbag connectors (A).

    

16. 16
    To install, perform the removal procedure in reverse order.