Hyundai Tucson Quiz
Body Work (Interior and Exterior)

Front Door Outside Handle

In this manual: Body Work (Interior and Exterior)
General Information — 17Engine Mechanical System — 51Engine Electrical System — 26Emission Control System — 23Engine/Fuel Control System — 44Clutch System — 12MANUAL TRANSMISSION SYSTEM — 12AUTOMATIC TRANSMISSION SYSTEM — 42Four-Wheel Drive (4WD) System — 14Drive Shaft and Axle — 22Suspension System — 30Steering System — 16Restraint — 21Braking System — 47Body Work (Interior and Exterior) — 145Body Electrical System — 162Heating, Ventilation and Air Conditioning — 39
5steps
~30min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Components and Component Location

COMPONENT LOCATION

1. Front Door Outside Handle

Repair Procedures

REPLACEMENT

  1. Remove the plug hole cover (B).
  2. Loosen the mounting bolt, then remove the front door outside handle cover (A).

    Tightening torque: 7.8 – 11.8 N·m

  3. Remove the front door outside handle (A) by sliding it forward.
  4. Disconnect the front door outside handle connector (A) by pressing the lock pin.
  5. To install, perform the removal procedure in reverse order.

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.