Front Door Lock

Components and Component Location

COMPONENT LOCATION

Repair Procedures

REPLACEMENT

1. 1
   Remove the front door module. (Refer to Front Door - "Front Door Module")
2. 2
   Remove the clip from the front door inside handle (A).

   

3. 3
   Disconnect the front door lock connector (A).

   

4. 4
   Remove the front door latch (A) by pulling it in the direction of the arrow.

   

5. 5
   Remove the front door outside handle base (A) by pressing the stopper pins at the rear.

   

6. 6
   To disconnect the front door outside handle base connector (A), spread both sides of the wire clip, then pull the outside handle base connector out.

   

7. 7
   Disconnect the wire harness from the front door outside handle connector (A).

   

8. 8
   Remove the front door outside handle base bracket (A).

   

9. 9
   Remove the front door outside handle cable (A).

   

10. 10
    To install, perform the removal procedure in reverse order.