Mode Selection

■ Left-Hand Drive

■ Right-Hand Drive

■ Type A

■ Type B

The mode buttons control the direction of airflow through the ventilation system.

The mode buttons control the direction of airflow through the ventilation system.

Air can be directed toward the floor, toward the side vents on the instrument panel, or toward the windshield. Five symbols are used to indicate the position of the face, bi-level, floor, floor and defrost, and defrost.

Face (B, G)

The airflow is directed to the upper body and face. In addition, you can direct the airflow from each vent.

Bi-level (B, C, D, E)

Airflow is directed to the face and floor.

Floor (A, C, E, D)

Most of the airflow is directed toward the floor, and a small portion of air is directed to the windshield and side window defrosters.

Floor and defrost (A, C, D, E)

Most of the airflow is directed to the floor and windshield, and a small portion of air is directed to the side window defroster.

Defrost (A, D)

Most of the airflow is directed to the windshield, and a small portion of air is directed to the side window defroster.

MAX A/C (if equipped)

To use the MAX A/C function, turn the mode selection dial fully to the left. The airflow is directed to the upper body and face.

In this mode, the A/C and recirculation positions are selected automatically.

Instrument Panel Vents

■ Left-Hand Drive

■ Right-Hand Drive

You can open and close the vents individually using the dial. You can also adjust the direction of the airflow from these vents as shown in the illustration.