Engine/Fuel Control System
Specifications
In this manual: Engine/Fuel Control System
~5min read
Specifications
Fuel System
| Item | Specification | |
| Fuel tank | Capacity | 62 L bed. (16.4 US gal, 65.5 US qt, 54.5 Imp. qt) |
| Fuel filter | Good | Paper Type |
| Fuel Pressure | Low Pressure Fuel Hose | 495 ~ 505 kPa (4.9 ~ 5.1 kgf/cm², 71.8 ~ 73.2 psi) |
| High Pressure Fuel Hose | 2.0 ~ 15.0 MPa (20.4 ~ 153.0 kgf/cm², 290.1 ~ 2175.6 psi) | |
| Fuel pump | Good | Electric, built into tank |
| Which was driven | electric motor | |
| High pressure fuel pump | Good | Mechanical type |
| Which was driven | Camshaft | |
Gauges
MANIFOLD ABSOLUTE PRESSURE SENSOR (MAPS) ▷ Type: Piezoresistive pressure sensor type ▷ Specification| PRESSURE (kPa (kgf/cm², psi)) |
Output voltage (V) |
| 20,0 (0,20, 2,9) | 0,79 |
| 46,7 (0,47, 6,77) | 1,84 |
| 101,3 (1,03, 14,7) | 4.0 |
Intake Air Temperature Sensor (IATS) ▶ Type: Thermistor ▷ Specification
| TEMPERATURE | RESISTANCE (kΩ) | |
| °C | °F | |
| -40 | -40 | 40,93~48,35 |
| +20 | +4 | 13,89~16,03 |
| 0 | 32 | 5,38~6,09 |
| 10 | 50 | 3,48~3,90 |
| 20 | 68 | 2,31~2,57 |
| 40 | 104 | 1,08~1,21 |
| 50 | 122 | 1,56~1,74 |
| 60 | 140 | 0,54~0,62 |
| 80 | 176 | 0,29~0,34 |
ENGINE COOLANT TEMPERATURE SENSOR (ECTS) ▶ Type: Thermistor ▷ Specification
| TEMPERATURE | RESISTANCE (kΩ) | |
| °C | °F | |
| -40 | -40 | 48.14 |
| +20 | +4 | 14,13~16,83 |
| 0 | 32 | 5,79 |
| 20 | 68 | 2,31~2,59 |
| 40 | 104 | 1,15 |
| 60 | 140 | 0,59 |
| 80 | 176 | 0,32 |
Throttle Position Sensor (TPS) [in ETC module] ▷ Type: Non-contact Hall IC sensor ▷ Specification
| Throttle Angle (°) | Output voltage (V) | |
| GST1 | GST2 | |
| 0 | 0,5 | 4,5 |
| 10 | 0,96 | 4.05 |
| 20 | 1,41 | 3,59 |
| 30 | 1,87 | 3.14 |
| 40 | 2,32 | 2,68 |
| 50 | 2,78 | 2,23 |
| 60 | 3,23 | 1,77 |
| 70 | 3,69 | 1,32 |
| 80 | 4.14 | 0,86 |
| 90 | 4.6 | 0,41 |
| 98 | 4,65 | 0,35 |
| THA (0) | 0,5 | 4,5 |
| THW (86) | 4.41 | 0,59 |
CRANKSHAFT POSITION SENSOR (CKPS) ▷ Type: Magnetic field sensitive ▷ Specification
| Item | Specification |
| Coil Resistance (Ω) | 774 ~ 946 [20 °C] |
CAMSHAFT POSITION SENSOR (CMPS) ▷ Type: Hall effect ▷ Specification. KNOCK SENSOR (KS) ▷ Type: Piezoelectric type ▷ Specification
| Item | Specification |
| Electrostatic Capacitance (pF) | 850~1150 |
Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 1] ▷ Type: Zirconia (ZrO2) [Linear] ▷ Specification
| Item | Specification |
| Heater Resistance (Ω) | 2,4 ~ 4,0 [20 °C] |
HEATED OXYGEN SENSOR (HO2S) [Bank 1 / Sensor 2] ▷ Type: Zirconia (ZrO2) [Binary] ▷ Specification
| A/F Ratio (λ) | Output voltage (V) |
| Rich | 0,6~1,0 |
| Tilt | 0~0,4 |
| Item | Specification |
| Heater Resistance (Ω) | 9,0 [20 °C] |
Rail Pressure Sensor (RPS) ▷ Type: Piezoelectric type ▷ Specification

| ACCELERATOR Position |
Output voltage (V) | |
| APS 1 | APS 2 | |
| THA | 0,7~0,8 | 0,33~0,43 |
| THW | 3,85~4,35 | 1,93~2,18 |
ACTUATORS
INJECTOR ▷ Specification| Item | Specification |
| Coil Resistance ( ) | 1,5 [20 °C] |
ETC Motor [integrated in ETC module] ▷ Specification
| Item | Specification |
| Coil Resistance ( ) | 0,3 ~ 100 [20 °C] |
PURGE CONTROL SOLENOID VALVE (PCSV) ▷ Specification
| Item | Specification |
| Coil Resistance ( ) | 22,0 ~ 26,0 [20 °C] |
CVVT Oil Control Valve (OCV) ▷ Specification
| Item | Specification |
| Coil Resistance ( ) | 9,4 ~ 10,4 [20 °C] |
VARIABLE INTAKE SOLENOID VALVE (VIS) ▷ Specification
| Item | Specification |
| Coil Resistance ( ) | 30,0 ~ 35,0 [20 °C] |
Fuel Pressure Regulator Valve ▷ Specification
| Item | Specification |
| Coil Resistance ( ) | 0,5 [20 °C] |
IGNITION COIL ▷ Type: Lock type ▷ Specification
| Item | Specification |
| Primary Winding Resistance (Ω) | 0,75 ± 15% [20 °C] |
| Secondary Winding Resistance (kΩ) | 5,9 ± 15% [20 °C] |
STANDARDS
| Item | Specification | ||
| Ignition Timing (°) | TDC 5±10 | ||
| Idle Speed (rpm) | A/C OFF | Neutral Range N and P | 700±100 |
| D Range | 600±100 | ||
| A/C ON | Neutral Range N and P | 700±100 | |
| D Range | 600±100 | ||
Tightening torque
Engine Control System
| Item | kgf·m | N·m | lbf·ft |
| ECM Mounting Nut | 1,0 - 1,2 | 9,8 - 11,8 | 7,2 - 8,7 |
| Manifold Absolute Pressure Sensor Mounting Bolt | 1,0 - 1,2 | 9,8 - 11,8 | 7,2 - 8,7 |
| Engine Coolant Temperature Sensor Installation | 3,0–4,0 | 29,4 - 39,2 | 21,7 - 28,9 |
| Crankshaft Position Sensor Mounting Bolt | 1,0 - 1,2 | 9,8 - 11,8 | 7,2 - 8,7 |
| Camshaft Position Sensor Mounting Bolt (Bank 1 / Intake) | 1,0 - 1,2 | 9,8 - 11,8 | 7,2 - 8,7 |
| Camshaft Position Sensor Mounting Bolt (Bank 1 / Exhaust) | 1,0 - 1,2 | 9,8 - 11,8 | 7,2 - 8,7 |
| Knock Sensor Mounting Bolt | 1,9~2,4 | 18,6~23,5 | 13,7~17,4 |
| Heated Oxygen Sensor Installation (Bank 1 / Sensor 1) | 4,0~5,0 | 39,2~49,1 | 28,9~36,2 |
| Heated Oxygen Sensor Installation (Bank 1 / Sensor 2) | 4,0~5,0 | 39,2~49,1 | 28,9~36,2 |
| Rail Pressure Sensor Installation | 3,0~3,6 | 30,0~35,0 | 22,1~25,8 |
| Electronic Throttle Body Mounting Bolt | 0,8 - 1,0 | 7,8 - 9,8 | 5,8 - 7,2 |
| Purge VSV Bracket Mounting Bolt | 1,0 - 1,2 | 9,8 - 11,8 | 7,2 - 8,7 |
| CVVT Oil Control Valve Mounting Bolt [Bank 1 / Intake] | 1,0 - 1,2 | 9,8 - 11,8 | 7,2 - 8,7 |
| CVVT Oil Control Valve Mounting Bolt (Bank 1 / Exhaust) | 1,0 - 1,2 | 9,8 - 11,8 | 7,2 - 8,7 |
| Ignition Coil Mounting Bolt | 1,0 - 1,2 | 9,8 - 11,8 | 7,2 - 8,7 |
Fuel System
| Item | kgf·m | N·m | lbf·ft |
| Fuel Tank Mounting Nut | 4,0~5,5 | 39,2~54,0 | 28,9~39,8 |
| Filler Neck Bracket Mounting Bolt | 0,4~0,6 | 3,9~5,9 | 2,9~4,3 |
| Accelerator Pedal Module Mounting Nut | 1,3~1,6 | 12,8~15,7 | 9,4~11,6 |
| Accelerator Pedal Module Mounting Bolt | 0,9~1,4 | 8,8~13,7 | 6,5~10,1 |
| Supply Pipe Mounting Bolt | 1,9~2,4 | 18,6~23,5 | 13,7~17,4 |
| High Pressure Fuel Pump Mounting Bolt | 1,3~1,5 | 12,8~14,7 | 9,4~10,9 |
| High Pressure Fuel Hose Mounting Nut | 2,7~3,3 | 26,5~32,4 | 19,5~23,9 |
| High Pressure Fuel Hose Function Block Mounting Bolt | 1,0 - 1,2 | 9,8 - 11,8 | 7,2 - 8,7 |
Test yourself
A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?