Windshield wipers

The wipers operate with the ignition ON as follows.

: For a single wipe, push the lever down and release it.

The wipers will operate continuously while the lever is pushed down and held.
o: Wipers off.
---: Wipers operate intermittently at a fixed interval. Use this mode in light rain or fog. To change the intermittent wiper interval, turn the dial (1).
1: Normal wiper speed.
2: High wiper speed.

NOTE

If there is a thick layer of snow or ice on the windshield, before using the wipers, turn on the heater for approximately 10 minutes or until the snow and/or ice is removed to allow the wipers to operate normally.