Front Seat Head Restraint

The driver and front passenger seats are equipped with adjustable headrests for passenger safety and comfort.

Up and Down Height Adjustment

To raise the head restraint:

1. Pull up to the desired position (1).

To lower the head restraint:

1. Press and hold the lock release button (2) on the head restraint support.

2. Lower the head restraint to the desired position (3).

Removal/Installation

To remove the head restraint:

1. Tilt the seatback (2) using the recliner lever or switch (1).

2. Raise the head restraint as far as possible.

3. Press the headrest lock button (3) and pull the headrest up (4).

WARNING

NEVER allow anyone to sit on a seat with the head restraint removed.

To reinstall the head restraint:

1. Insert the head restraint posts (2) into the holes while pressing the release button (1).

2. Tilt the seatback (4) using the recliner lever or switch (3).

3. Adjust the headrest to the appropriate height.

WARNING

Always check that the headrest is locked in position after reinstallation and adjustment.

Active Head Restraint

The active head restraint is designed to move forward and upward in a rear impact. This helps prevent the head of the driver and front passenger from moving rearward, which helps minimize neck injuries.

WARNING

A gap may appear between the seat and the head restraint release button when sitting on the seat or when pushing or pulling the seat. Be careful not to get your finger, etc. caught in the gap.