Oil Seal Repair Procedures

Replacement

1. 1
   Remove the drive shaft assembly. (Right side) (Refer to Drive Shaft and Axle - "Front Propeller Shaft")
2. 2
   Remove the dust cover (A).

   

3. 3
   Remove the oil seal (A, B).

   

4. 4
   Install the oil seal using the special service tool.

   Apply lithium grease between the seal lips. Use the oil seal installer (09473-3B100) after removing the coupling (A).

   

   

5. 5
   Install a new dust cover (A).

   

6. 6
   Add to the transfer fluid. (Refer to All Wheel Drive System - "Transfer Fluid")
7. 7
   Install the drive shaft assembly. (Right side) (Refer to Drive Shaft and Axle - "Front Propeller Shaft")
8. 8
   Install the front muffler. (Gasoline 3.0/3.3 only) G 3.0 GDI (Refer to Engine Mechanical System - "Front Muffler") G 3.3 MPI (Refer to Engine Mechanical System - "Front Muffler")
9. 9
   Remove the transfer assembly from the transaxle assembly. (Refer to Transfer Assembly - "Front Wheel Transfer Assembly")
10. 10
    Remove the oil seal (A).

    

11. 11
    Install the oil seal using the special service tool.

    Apply lithium grease between the seal lips. Use the oil seal installer (09473-3B100) after removing the coupling (A).

    

12. 12
    Add to the transfer fluid. (Refer to All Wheel Drive System - "Transfer Fluid")
13. 13
    Install the transfer assembly. (Refer to All Wheel Drive System - "Front Wheel Transfer Assembly")