Jeep Wrangler Quiz
KNOW YOUR VEHICLE

Front Head Restraints

In this manual: KNOW YOUR VEHICLE
INTRODUCTION — 5KNOW YOUR VEHICLE — 177GETTING TO KNOW THE INSTRUMENT PANEL — 77STARTING AND OPERATING — 126MULTIMEDIA — 106SAFETY — 89IN CASE OF EMERGENCY — 24SERVICE AND MAINTENANCE — 105SPECIFICATIONS — 16CUSTOMER ASSISTANCE — 7
2steps
~12min
2/5difficulty
Done 0 of 2

To raise a head restraint, pull it up. To lower a head restraint, press the adjustment button located at the base of the head restraint and push the head restraint down. The release button does not need to be pushed to adjust the head restraint.

To remove a head restraint, raise it to its fully extended position, then press the adjustment button and release button at the base of each post while pulling the head restraint up. To reinstall the head restraint, insert the head restraint posts into the holes and push down. Then adjust it to the proper height.

Jeep Wrangler. Front Head Restraints

Front Head Restraint

  1. Release Button
  2. Adjustment Button
  • An unsecured head restraint thrown forward in a collision or sudden stop can cause serious injury or death to vehicle occupants. Always securely store a removed head restraint in a location outside the passenger compartment.
  • ALL head restraints MUST be reinstalled in the vehicle for proper occupant protection. Follow the above instructions to reinstall head restraints before operating the vehicle or occupying a seat.

NOTE:

Do not rotate the head restraint 180 degrees into the wrong position in an attempt to gain additional clearance to the back of the head.

Test yourself

A quick Jeep Wrangler quiz: every answer comes with an explanation and a link to the manual page.