Rear Head Restraints - Four-Door Models

The rear seat is equipped with non-adjustable but folding, hanging head restraints, as well as an adjustable, removable center head restraint.

To fold the outboard head restraint, pull the inner release lever located at the top of the rear seat.

Rear Head Restraint Lever

Rear Head Restraint Folded

To return the head restraint to the upright position, lift the head restraint until it locks in place.

To raise the center head restraint, lift it by the head restraint. To lower the center head restraint, press the adjustment button located at the base of the head restraint and push down on the head restraint.

To remove the center head restraint, press the release button located at the base of the head restraint and pull the head restraint up.

To install the head restraint, hold the latch button while pressing down on the head restraint. For information on child seat tether routing, refer to Child Restraint Tether Routing.

NOTE:

Lower the center head restraint to avoid contact with the center console when folding the seat down.

• Do not drive the vehicle without the rear seat head restraints installed when passengers occupy the rear seat. In a collision, persons riding in this area without head restraints installed are more likely to be seriously injured or killed.
• An unsecured head restraint thrown forward in a collision or sudden stop can cause serious injury or death to vehicle occupants. Always securely store a removed head restraint in a location outside the passenger compartment.
• ALL head restraints MUST be reinstalled in the vehicle for proper occupant protection. Follow the reinstallation instructions above before operating the vehicle or occupying the seat.