Fuel System (DFI)
Air Cleaner Housing Removal
In this manual: Fuel System (DFI)
~1min read
- Remove the fuel tank (see Fuel Tank Removal).
- Disconnect the secondary fuel hose [A] from the delivery pipe of the nozzle assy [B] (see Fuel Hose Replacement in the Periodic Maintenance chapter).
- Disconnect the secondary fuel injector connectors [C].
- Free the lead from the grooves [D].
- Remove the bolts [A].
- For ZX1000JD/KD, remove the ESD ECU from the air cleaner housing.
- Remove: Clamp [A] Connector [B] Screws [C] Upper Air Cleaner Housing [D] Bolt [E]
- Remove: ECU (see ECU Removal) Air Cleaner Element (see Air Cleaner Element Replacement in the Periodic Maintenance chapter)
- Disconnect: Air Cleaner Drain Hose [A] Breather Hose [B]
- Loosen the air cleaner housing clamp bolts [A].
- Disconnect the hose [B].
- Separate the air switching valve hose [A] from the lower air cleaner housing [B].
Test yourself
A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?