Kawasaki Ninja ZX-10R Quiz
Self-Diagnosis System

Antenna Resistance Inspection

In this manual: Self-Diagnosis System
General Information — 26Periodic Maintenance — 66Fuel System (DFI) — 79Cooling System — 28Engine Top End — 51Clutch — 24Engine Lubrication System — 28Engine Removal/Installation — 5Crankshaft/Transmission — 65Wheels/Tires — 22Final Drive — 17Brakes — 54Suspension — 36Steering — 17Frame — 40Electrical System — 104Self-Diagnosis System — 112Appendix — 10
~1min read
  • Turn the ignition switch to OFF.
  • Remove the air cleaner housing (see Air Cleaner Housing Removal in the Fuel System (DFI) chapter).
  • Disconnect the antenna lead connector [A].
  • Measure the antenna resistance.

Antenna Resistance Connections: BK lead ←→ BK/W lead Standard: About 3.0 4.6 Ω


Antenna Resistance Inspection

If the reading is out of the standard, replace the antenna (see Immobilizer System Parts Replacement in the Electrical System chapter).

If the reading is within the standard, check the wiring to the amplifier (see Immobilizer System Circuit).

If the wiring is good, check the input voltage of the amplifier (see Amplifier Input Voltage Inspection).

Test yourself

A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.