Kawasaki Ninja ZX-10R Quiz
Electrical System

Gear Position Switch Installation

In this manual: Electrical System
General Information — 26Periodic Maintenance — 66Fuel System (DFI) — 79Cooling System — 28Engine Top End — 51Clutch — 24Engine Lubrication System — 28Engine Removal/Installation — 5Crankshaft/Transmission — 65Wheels/Tires — 22Final Drive — 17Brakes — 54Suspension — 36Steering — 17Frame — 40Electrical System — 104Self-Diagnosis System — 112Appendix — 10
~1min read
  • Securely place the springs [A] and pins [B] into the holes [C] of the shift drum.
  • Apply grease to the new O-ring [D].
  • Install the gear position switch [E].
  • Apply a non-permanent locking agent to the threads of the gear position switch screws [F].
  • Tighten: Torque - Gear Position Switch Screws: 2.9 NВ·m (0.30 kgfВ·m, 26 inВ·lb)
  • Run the lead correctly (see Cable, Wire, and Hose Routing section in the Appendix chapter).
  • Install the removed parts (see appropriate chapters).
Gear Position Switch Installation

Test yourself

A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.