Oxygen Sensor Installation (Equipped Models)

NOTICE

Never drop the oxygen sensor [A] especially on a hard surface. Such a shock to the unit can damage it. Do not touch the sensing part [B] to prevent oil contact. Oil contamination from hands can reduce sensor performance.

• Tighten: Torque - Oxygen Sensor: 25 NВ·m (2.5 kgfВ·m, 18 ftВ·lb)
• Run the oxygen sensor lead correctly (see Cable, Wire, and Hose Routing section in the Appendix chapter).

Oxygen Sensor Inspection (Equipped Models)

• Refer to the Oxygen Sensor Inspection in the Self -Diagnosis System chapter.

Oxygen Sensor Heater Inspection (Equipped Models)

• Refer to the Oxygen Sensor Heater Resistance Inspection in the Self-Diagnosis System chapter.