Kawasaki Ninja ZX-10R Quiz
Fuel System (DFI)

Throttle Body Assy Installation

In this manual: Fuel System (DFI)
General Information — 26Periodic Maintenance — 66Fuel System (DFI) — 79Cooling System — 28Engine Top End — 51Clutch — 24Engine Lubrication System — 28Engine Removal/Installation — 5Crankshaft/Transmission — 65Wheels/Tires — 22Final Drive — 17Brakes — 54Suspension — 36Steering — 17Frame — 40Electrical System — 104Self-Diagnosis System — 112Appendix — 10
~1min read
  • Apply a thin coat of grease to the throttle cable lower ends.
  • Fit the accelerator cable end [A] and the decelerator cable end [B] into the throttle pulley.
  • Install the clamp [C] securely.
Throttle Body Assy Installation

  • Install the throttle body assy holder clamp bolt heads [A] outside as shown in the figure.
  • Tighten: Torque - Throttle Body Assy Holder Clamp Bolts: 2.0 NВ·m (0.20 kgfВ·m, 18 inВ·lb)
Throttle Body Assy Installation

  • Turn the throttle grip and make sure that the throttle pulley moves smoothly and return by spring force.
  • Run the leads and hoses correctly (see Cable, Wire, and Hose Routing section in the Appendix chapter).
  • Adjust: Throttle Grip Free Play (see Throttle Control System Inspection in the Periodic Maintenance chapter)

Test yourself

A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.