Throttle Body Assy Disassembly

1. Throttle Body Assy

2. Subthrottle Valve Actuator

3. Idle Speed Control Valve Actuator

4. Main Throttle Sensor

5. Subthrottle Sensor

6. Primary Fuel Injectors

7. Delivery Pipe Assy

NOTICE

Do not remove, disassemble or adjust the main throttle sensor, subthrottle sensor, subthrottle valve actuator, throttle link mechanism and throttle body assy, because they are adjust or set surely at the manufacturer. Adjustment of these parts could result in poor performance, requiring replacement of the throttle body assy.

• Remove the throttle body assy (see Throttle Body Assy Removal).
• Remove the screws [A] to pull out the primary fuel injectors [B] from the throttle body assy together with the delivery pipe assy [C].

NOTE

Do not damage the insertion portions of the injectors when they are pulled out from the throttle body.

• Pull out the primary fuel injectors [A] from the delivery pipe assy [B].

NOTE

• Do not damage the insertion portions of the injectors when they are pulled out from the delivery pipe assy.

NOTICE

Never drop the primary fuel injector especially on a hard surface. Such a shock to the injector can damage it.