Body (Interior and Exterior)
Console Repair Procedures
In this manual: Body (Interior and Exterior)
14steps
~84min
3/5difficulty
Done 0 of 14
Replacement
Floor Console Replacement
|
- Using a screwdriver or remover, remove the boots (B).
- To remove the shift lever (A) and boots (B), pull them upward.
- Using a screwdriver or remover, remove the floor console upper cover (A).
- Disconnect the connectors (A) from the floor console upper cover. [Rear]
[Front]
- Remove the console armrest (A).
- Remove the console tray (A).
- Using a screwdriver or remover, remove the console side cover (A). [LH]
[RH]
- Disconnect the rear power outlet connector (A).
- Loosen the mounting screws and bolts, then remove the floor console assembly (A).
- Installation is the reverse of removal.

- Make sure the connector is properly connected.
- Replace any damaged clips.
|
- Remove the floor console assembly.
- Loosen the mounting screws and remove the rear console cover (A).
- Loosen the mounting screws and remove the console armrest (A).
- Installation is the reverse of removal.

- Replace any damaged clips.
Test yourself
A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?