Kia Cadenza VG Owner's Manual Quiz
Suspension System

TPMS Receiver Repair Procedures

In this manual: Suspension System
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
7steps
~42min
2/5difficulty
010203040505.94N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Replacement

  1. Disconnect the negative (-) battery cable.
  2. Remove the glove box housing. (Refer to Body - "Glove Box Housing")
  3. Disconnect the connector.
  4. Remove the bracket and receiver (A) by loosening the nut.

    Tightening torque: 3.9 ~ 5.9 N·m

  5. Install in the reverse order of removal.
  6. Reconnect the battery and turn the ignition on.
    Securely connect the receiver connector until a click is heard. Be careful not to damage parts when moving or loading.
  7. Replace the receiver, then perform the learning procedure using the diagnostic tool (GDS). Vehicle name entry
    VIN entry

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.