Kia Cadenza VG Owner's Manual Quiz
Engine Mechanical System

Variable Intake Solenoid (VIS) Actuator Repair Procedures

In this manual: Engine Mechanical System
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
10steps
~60min
3/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 10

Removal and Installation

VIS 1 [Intake Manifold]
  1. Disconnect the negative (-) battery terminal.
  2. Remove the engine cover.
  3. Disconnect the VIS actuator hose (A).
  4. Remove the VIS actuator (B).

    Tightening torque: 9.8 ~ 11.8 N·m

  5. Install in the reverse order of removal.
  6. Disconnect the negative (-) battery terminal.
  7. Remove the engine cover.
  8. Disconnect the VIS actuator hose (A).
  9. Remove the VIS actuator (B).

    Tightening torque: 9.8 ~ 11.8 N·m

  10. Install in the reverse order of removal.
VIS 2 [Surge Tank]

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.