Body (Interior and Exterior)

Center Fascia Panel Repair procedures

16steps
~96min
4/5difficulty
Done 0 of 16

Replacement

[Center fascia panel]

  1. Remove the crash pad side cover [RH] (A) by using a remover.

  2. Remove the crash pad plate [RH] (A) by using a remover.

  3. Disconnect the start/stop button connector (A).

  4. Remove the center fascia panel (A) by using a remover.

  5. Install in the reverse order of removal.

[Center fascia lower panel]

  1. Remove the crash pad side cover [LH] (A) by using a remover.

  2. Remove the crash pad lower panel (A) after loosening the screw.

  3. Disconnect the fuel filler door switch connector (A).

  4. Remove the crash pad side cover [RH] (A) by using a remover.

  5. Remove the crash pad garnish [LH] (A) by using a remover.

  6. Disconnect the start/stop button connector (A).

  7. Pull out and remove the gear knob (A).

  8. Remove the front console upper cover (A) by using a remover.

  9. Disconnect the console upper cover connector (A).

  10. Remove the center fascia lower panel (A) by using a remover.

  11. Install in the reverse order of removal.