Body (Interior and Exterior)

Crach Pad Center Panel Repair procedures

9steps
~54min
3/5difficulty
Done 0 of 9

Replacement

  1. Disconnect the negative (-) battery terminal.

  2. Remove the floor console assembly.

    (Refer to Floor Console - "Floor Console Assembly")

  3. Remove the cluster fascia panel.

    (Refer to Crash Pad - "Cluster Fascia Panel ")

  4. Remove the glove box housing.

    (Refer to Crash Pad - "Glove Box Housing")

  5. Remove the center fascia panel.

    (Refer to Crash Pad - "Center Fascia Panel")

  6. Separate the heater control unit (A) after loosening the screws.

  7. Remove the heater control unit (B) after disconnecting the connector (A).

  8. Remove the crash pad main lower panel (A) after loosening the nut & screws.

  9. Install in the reverse order of removal.